Quote@surplusmaster.com ***609-709-7471*** SEARCH

<> Telephones: Main Page<>Central Office, Modems,Main Page<>I.C.s, Eproms, Main Page <>
<>
Computers and cables: Main Page<>Test Equipment: Main Page<>Military & Microwave:Main Page <>  

LabVolt  F.A.C.I.T.  Equipment for Sale
 UPDATED 
 12/2015  

Page One of One:
IN STOCK AND AVAILABLE NOW.  See our new Kits and Solar Cell pages !

Quantity 

Part Number AS-

Description

      0

  1242

 1242 Lab Instrument .
Larger in size than the Lab-Volt Model 1247, the Model 1242 is a general-purpose instrumentation module that provides the same VOM and function generator contained in the Model 1247, plus two 15 Vdc power supplies.

     0

 91000-20

Computer Interface Base Unit .
Each computerized base unit communicates with the computer through a serial communication port or a USB port via an optional adapter. The base unitís onboard microcontroller sends system status to the host and receives control commands required to set and reset circuit modification (CM) and fault controls. FACET boards slip easily into the base unit by means of zero insertion
force (ZIF) connectors.

                                

      3

91001-20

 DC Fundamentals Training Module .
The objective of the DC Fundamentals Circuit Board and Course is to familiarize students with the Batteries, Switches, Ohm's Law, Series Circuits, Parallel Circuits, Series and Parallel Circuits, Power, Linear and Non-Linear Variable Resistors, Voltage Dividers, Voltmeters, Ammeters, and Ohmmeters.

      14

91002-20

 DC Network Theorems Training Module .
The objective of the DC Network Theorems Circuit Board and Course is to familiarize students with the Kirchhoff's Current and Voltage Laws, Kirchhoff's Laws Combined, Kirchhoff's Solution with Two Sources, Superposition, Thevenin Circuits, Thevenizing a Bridge Circuit, Thevenin / Norton Conversion, and Delta to Y or Y to Delta.

      4

 91003-20

 AC 1 Fundamentals Training Module .
The objective of the AC 1 Fundamentals Circuit Board and Course is to familiarize students with Impedance, AC/DC Waveforms, Phase Angle, Inductance/Inductive Reactance, Transformer, Capacitance and Capacitive Reactance, RC Time Constants, and RC/RL Wave Shapes.

      6

 91004-20

 AC 2 Fundamentals Training Module .
The objective of the AC 2 Fundamentals Circuit Board and Course is to familiarize students with RLC, Resonance, Power, Low-Pass Filter, High-Pass Filter, Series Band Pass Filter, Parallel Band Pass Filter, Series Band Stop Filter, and Parallel Band Stop Filter.

      0

 91005-20

 Semiconductor Devices Training Module .
The objective of the Semiconductor Devices Circuit Board and Course is to familiarize students with Diodes and Half-Wave Rectification, Full-Wave Rectification with Power Supply, Filters, Zener Diode Regulator, Diode Waveshaping, Voltage Doubler, Transistor Junctions, PNP DC Bias, and Transistor Load Lines. The course provides comprehensive, hands-on instruction in the terminology, principles, and applications of semiconductors in typical circuits.

      7

 91006-20

 Transistor Amplifier Circuits Training Module .
The objective of the Transistor Amplifier Circuits Course is to familiarize students with the Common Base Amplifier, Common Emitter Amplifier, Common Collector Amplifier, Bias Stabilization, RC Coupling and Transformer Coupling Amplifiers, and Direct Coupling Amplifier.

      15

 91012-20

 Op Amp Fundamentals Training Module .
The objective of the Operational Amplifier Fundamentals Circuit Board and Course is to familiarize students with the Inverting Amplifier, Non-Inverting Amplifier, Voltage Follower, Inverting Summing Amplifier, Non-Inverting Summing Amplifier, Difference Amplifier, Open-Loop Comparator, and Comparator Sine/Square Comparator.
 

      14

 91013-20

 Op Amp ApplicationsTraining Module .
The objective of the Operational Amplifier Applications Circuit Board and Course is to familiarize students with op-amp applications.


      14

 91014-20

 Digital Logic Fundamentals Training Module .
The objective of the Digital Logic Fundamentals Circuit Board and Course is to familiarize students with AND/NAND, OR/NOR, XOR/XNOR, Open Collector, SET/RESET Flip-Flop, D-Type Flip-Flop, JK Flip-Flop Tri-State Output, TTL/CMOS Comparison, and Data Bus Control circuits.

      14

 91015-20

 Digital Circuit Fundamentals Training Module .
The objective of the Digital Circuit Fundamentals 1 Circuit Board and Course is to familiarize students with Asynchronous Ripple Counters, Synchronous Counters, 4-Bit Shift Registers, 4-Bit Adders, and 4-Bit Comparators.

      14

 91016-20

 Digital Circuit Fundamentals 2 Training Module .
The objective of the Digital Circuit Fundamentals 2 Circuit Board and Course is to familiarize students with the BCD Decimal Decoder, BCD Priority Encoder, ADC, DAC, Multiplexer, Demultiplexer, 7-Segment Driver and Display, and Parity Generator and Checker.

      10

 91017-20

 Microprocessor, 32-Bit (91017).
The objective of the 32-Bit Microprocessor Circuit Board and Course is to build on knowledge gained in Digital Logic Fundamentals to provide comprehensive, hands-on instruction in the principles and applications of 32-bit microprocessor systems.

      10

 91018-20

 Analog Communications Training Module .
The objective of the Analog Communications Course is to familiarize students with the functions of oscillators, filters, amplifiers, LC networks, modulators, limiters, mixers, and detectors in AM, FM, PM, SSB, and PLL circuits.

 0

 91019-20

 Transducer Fundamentals Training Module .
The Transducer Fundamentals Course guides students through the circuits and devices that convert physical properties into electrical quantities for the purpose of measurement and control.

      10

 91022-20

 Digital Communications 1 Training Module .
The objective of the Digital Communications 1 Circuit Board and Course is to familiarize students with PAM, TDM, PTM, and PCM and the functions of Sampler, Sample/Hold, Adder, Ramp Generator, Comparator, Limiter, Filter, CODEC, PLL, Compressor, Expander, Integrator, Differentiator, Latched Comparator, Speaker Amplifier, and Channel Simulator circuits.

      08

 91023-20

 Digital Communications 2 Training Module .
The Digital Communications 2 course provides further comprehensive, hands-on instruction in the terminology, principles, and applications of digital communication circuits, which includes: NRZ, RZ, Manchester Encoding and Decoding, Clock Synchronizer, Frequency-Shift Keying Generation, FSK Asynchronous and Synchronous Detection, Phase-Shift Keying Generation, PSK Synchronous Detection, Amplitude-Shift Keying Generation, ASK synchronous and Synchronous Detection, Channel Effects, and FSK/DPSK Modem.
 

      08  91025-20  Fiber Optic Training Module .
The objective of the Fiber Optic Communications Circuit Board and Course is to familiarize students with the Digital Transmitter, Digital Receiver, Analog Transmitter, Analog Receiver, and RS-232 Interface used in fiber optic communications.

   ------------------------------------------------------------------------------------------ 
LAB VOLT SOFTWARE

QTY. 01        FOLDER   SOFTWARE COMPUTER BASED LABORATORY WITH:

FOR MS WINDOWS  DC FUNDAMENTALS  VER 2.15   (QTY. 4 - 3.5" FLOPPIES}
FOR MS WINDOWS  DIGITAL CIRCUIT FUNDAMENTALS 1  VER 2.11   (QTY.3 - 3.5" FLOPPIES}
FOR MS WINDOWS  DIGITAL CIRCUIT FUNDAMENTALS 2  VER 2.11   (QTY.3 - 3.5" FLOPPIES}
FOR MS WINDOWS  AC FUNDAMENTALS 1  VER 2.15   (QTY.3 - 3.5" FLOPPIES}
FOR MS WINDOWS  AC FUNDAMENTALS 2  VER 2.11   (QTY.3 - 3.5" FLOPPIES}
FOR MS WINDOWS  TRANSDUCER FUNDAMENTALS   VER 2.11   (QTY.6 - 3.5" FLOPPIES}
-------------------------------------------------------------------
QTY. 01        FOLDER   SOFTWARE COMPUTER BASED LABORATORY WITH:
WINFACET COURSE EDITOR  VER. 2.00 
   (QTY.3 - 3.5" FLOPPIES}
FOR WINDOWS  CBL  SYSTEM UTILITIES  VER 2.25   (QTY.4 - 3.5" FLOPPIES}
FOR WINDOWS  DIGITAL LOGIC FUNDAMENTALS  VER 2.15   (QTY.5 - 3.5" FLOPPIES}
FOR WINDOWS  DC NETWORK THEOREMS   VER 2.11   (QTY.4 - 3.5" FLOPPIES}
FOR WINDOWS  323 BIT MICROPROCESSOR   VER 2.11   (QTY.8 - 3.5" FLOPPIES}
FOR WINDOWS  FET FUNDAMENTALS  VER 2.15   (QTY.4 - 3.5" FLOPPIES}
FOR WINDOWS  OP AMP FUNDAMENTALS  VER 2.15   (QTY.4 - 3.5" FLOPPIES}
FOR WINDOWS  SEMICONDUCTOR FUNDAMENTALS  VER 2.15   (QTY.4 - 3.5" FLOPPIES}
-------------------------------------------------------------------------

QTY. 01

       SW 91334-HO

 FOLDER   SOFTWARE  MANAGER  AS91334-00  WITH:

 

 

MANAGER  VER 2.0   VER 1     (QTY.2 - 3.5" FLOPPIES}

 

 

MANAGER  DATA VER 2.0   VER 1     (QTY.1 - 3.5" FLOPPIES}

 

 

 

QTY. 01

       SW 91334-HO

 FOLDER   SOFTWARE  MANAGER  AS91334-00  WITH:

 

 

MANAGER  VER 2.12   VER 1     (QTY.2 - 3.5" FLOPPIES}

 

 

MANAGER  DATA VER 2.12   VER 1     (QTY.1 - 3.5" FLOPPIES}

 

 

 

QTY. 01

       SW 91333-HO

 FOLDER   SOFTWARE  MANAGER (NETWORK)  AS91333-00  WITH:

 

 

MANAGER NETWORK VER 2.12   VER 1     (QTY.2 - 3.5" FLOPPIES}

 

 

 

QTY. 02

      SW 91012-HO

 FOLDER   SOFTWARE  OP AMP FUNDAMENTALS WITH:

 

 

OP AMP FUNDAMENTALS  VER 1     (QTY.3 - 3.5" FLOPPIES}

 

 

 

QTY. 01

       SW 91000-HO

 FOLDER   SOFTWARE  CBL.  SYS. UTIL.  WITH:

 

 

CBL SYSTEM/UTILITIES  VER 2.10    (QTY.2 - 3.5" FLOPPIES}

 

 

 

QTY. 01

       SW 91000-HO

 FOLDER   SOFTWARE  CBL.  SYS. UTIL.  WITH:

 

 

CBL SYSTEM/UTILITIES  VER 2.11A    (QTY.3 - 3.5" FLOPPIES}

 

 

 

QTY. 01

        SW 91001-HO

 FOLDER   SOFTWARE DC FUNDAMENTALS WITH:

 

 

DC AMP FUNDAMENTALS  VER 1.01     (QTY.2 - 3.5" FLOPPIES}

 

 

 

QTY. 01

       SW 91005-HO

 FOLDER   SOFTWARE  SEMICONDUCTOR FUNDAMENTALS WITH:

 

 

SEMICONDUCTOR FUNDAMENTALS  VER 1.00     (QTY.3 - 5.25" FLOPPIES}

 

 

 

QTY. 01

       SW 91015-HO

 FOLDER   SOFTWARE  DIGITAL CIRCUIT FUNDAMENTALS 1 WITH:

 

 

DIGITAL CIRCUIT FUNDAMENTALS 1 VER 1.00     (QTY.2 - 3.5" FLOPPIES}

 

 

 

QTY. 01

       SW 91016-HO

 FOLDER   SOFTWARE  DIGITAL CIRCUIT FUNDAMENTALS 2 WITH:

 

 

DIGITAL CIRCUIT FUNDAMENTALS 2 VER 1.00     (QTY.2 - 3.5" FLOPPIES}

 

 

 

QTY. 01

       SW 91003-HO

 FOLDER   AC 1 FUNDAMENTALS  WITH:

 

 

AC 1 FUNDAMENTALS  VER 1.01     (QTY.2 - 3.5" FLOPPIES}

 

 

 

QTY. 01

       SW 91019-HO

  FOLDER   TRANSDUCER FUNDAMENTALS  WITH:

 

 

 TRANSDUCER  VER 1.01     (QTY.3 - 3.5" FLOPPIES}

 

 

 

QTY. 01

       SW 91017-HO

 FOLDER   32 BIT MICROPROCESSOR WITH:

 

 

32 BIT MICROPROCESSOR  VER 1.00     (QTY.2 - 3.5" FLOPPIES}

 

 

 

QTY. 01

       SW 91014-HO

 FOLDER   DIGITAL LOGIC FUNDAMENTALS WITH:

 

 

DIGITAL LOGIC FUNDAMENTALS  VER 1.00     (QTY.2 - 3.5" FLOPPIES}

 

 

 

QTY. 01

       SW91907-HO

 VER 2.00 MANAGER FOR WINDOWS       (QTY.2 - 3.5" FLOPPIES}          

 

 

 

QTY. 01

 WALLI FOR WINDOWS

   INCOMPLETE MISSING DISK 1  (QTY.1 - 3.5" FLOPPIES} 


 
ALL EQUIPMENT GUARANTEED,IN STOCK, AND IS AVAILABLE NOW. PLEASE
CALL MIKE BELMONTE FOR ADDITIONAL INFORMATION.
 
609-709-7471
 
 
 
 
emaill:
Quote@surplusmaster.com 

  © www.surplusmaster.com